--- title: "setfailopencfg restore-inline" slug: "setfailopencfg-restore-inline-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/setfailopencfg-restore-inline-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # setfailopencfg restore-inline Sensor port pairs deployed in the inline fail-open mode, that is, connected to external passive fail-open kits and, port pairs with built-in fail-open support, are disabled when they go into the bypass mode due to external network link-down events. You can configure to periodically restore all such port pairs from bypass to inline mode using the `setfailopencfg restore-inline` command. > [!NOTE] > Note > > This feature is not supported for active fail-open kits. When enabled, the Sensor attempts to restore a port pair from bypass to inline mode periodically according to the configured interval. This restore operation can be enabled only when the Sensor is in good health. **Syntax:** `setfailopencfg restore-inline <enable|disable>` **Default Value:** Disabled **Applicable to:** NS-series Sensors