--- title: "Setting account status using the CLI" slug: "setting-account-status-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/setting-account-status-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting account status using the CLI Use the CLI commands in this topic to set the account status for a user. For a managed appliance, you can perform this procedure on the Central Management System appliance as well as the local appliance. The procedure remains the same. However, you will need to take the additional step to locate the appliance on the Central Management System CLI. For instructions on locating an appliance on the Central Management System CLI, see the *Trellix Central Management System Administration Guide*. Prerequisites - Admin access To set an account status : 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Change the password for the specified user. Use the following command: ``` username password ``` 3. Disable the means to log in to this account. Use the following command: ``` username disable ``` 4. Save your changes: ``` hostname (config) # write memory ``` For command usage and parameters, see the *CLI Reference*. :