--- title: "Setting device profiling parameters for all Sensors belonging to a domain" slug: "setting-device-profiling-parameters-for-all-sensors-belonging-to-a-domain-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:51Z published: 2026-11-19T12:30:51Z canonical: "docs.trellix.com/setting-device-profiling-parameters-for-all-sensors-belonging-to-a-domain-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting device profiling parameters for all Sensors belonging to a domain 1. Go to **Devices** → **** → **Global** → **IPS Devices Settings** → **Passive Device Profiling**. The **Passive Device Profiling** page appears. 2. Select the technique that you would like the Manager to use for device profiling. You will notice three checkboxes: - **DHCP** indicates the use of DHCP DISCOVER and REQUESTS packets for device profiling. - **TCP** indicates the use of TCP SYN and SYN + ACK packets for device profiling. - **HTTP** indicates the use of HTTP User Agent field for device profiling. > [!WARNING] > Important > > The above mentioned techniques are enabled by default at the global level. However, to ensure that device profiling is enabled, you must configure the settings per device or per interface using the **Policy Manager** page. 3. Specify the **Profile Expiration** duration. This timer ensures that the periodic re-profiling of a device happens only once within that interval. Trellix recommends this duration be set at 5 minutes. However, you can alter this and increase it up to 12 hours. 4. Specify the **Endpoint Inactivity Timer** duration. This value specifies the duration after which information for a device is considered invalid. It occurs when the host has remained idle for the said duration. This timer ensures that the Sensor will renew its detection of the IP if it is noticed again. Trellix recommends this duration be set at 1 hour. However, you can alter this and increase it up to 24 hours. > [!NOTE] > Note > > The parameters set in steps 2, 3, and 4 can be overridden or inherited at the device or interface level using the **Policy Manager** page. 5. Click **Save**.