--- title: "Setting the date and time using the Web UI" slug: "setting-the-date-and-time-using-the-web-ui-1" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-10-02T13:52:25Z published: 2026-10-02T13:52:25Z canonical: "docs.trellix.com/setting-the-date-and-time-using-the-web-ui-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting the date and time using the Web UI Use the top section of the **Date and Time Settings** page to set the date and time for your File Protect appliance. ![All_Settings_DateManual_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-142515c2-784a-3f8e-0df1-6919560e0cdc(8).png?sv=2026-02-06&spr=https&st=2026-11-20T05%3A30%3A01Z&se=2026-11-20T06%3A30%3A01Z&sr=c&sp=r&sig=oEhxyCAWWutVwUCwq3mNTuALSw0Ze09w29gwo6aSEP0%3D) ### Important NTP synchronization is set by default and must be disabled before you can manually configure the date and time. For instructions about disabling NTP, see [NTP server configuration](/network-and-platform/docs/ntp-server-configuration-3) . Prerequisites - Admin access To set the date and time: 1. Click the **Settings** tab. 2. Click **Date and Time** on the sidebar. 3. Select the date and time from the drop-down lists. 4. Click **Update Time**. 5. Set the time zone as described in [Time zone configuration](/network-and-platform/docs/time-zone-configuration-6) . :