--- title: "Setting the date and time using the Web UI" slug: "setting-the-date-and-time-using-the-web-ui-2" updated: 2026-08-25T21:18:18Z published: 2026-08-25T21:18:18Z canonical: "docs.trellix.com/setting-the-date-and-time-using-the-web-ui-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting the date and time using the Web UI Use the top section of the **Date and Time Settings** page to set the date and time for your Central Management System appliance. ### Note The Intelligent Virtual Execution - Server appliance has a CLI and a Web UI. The recommended method for this configuration on a Intelligent Virtual Execution - Server appliance is through the Central Management System Web UI. ![All_Settings_DateManual_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-142515c2-784a-3f8e-0df1-6919560e0cdc(5).png?sv=2026-02-06&spr=https&st=2026-11-20T05%3A38%3A04Z&se=2026-11-20T06%3A38%3A04Z&sr=c&sp=r&sig=1La%2FUQxSZDXOlNBNWqRz6%2FlTEugma96bPBtGFnefaCo%3D) ### Important NTP synchronization is set by default and must be disabled before you can manually configure the date and time. For instructions about disabling NTP, see [NTP server configuration](/docs/ntp-server-configuration-3) . ### Note If you manually configure the time of Endpoint Security (HX) servers, be sure the server times of all your Endpoint Security (HX) servers are synchronized. A number of Endpoint Security (HX) services (including PKI services and transport layer security services) require that the dates and times of your Endpoint Security (HX) servers be accurate and synchronized within five seconds of each other. If you use NTP synchronization, the dates and times of your Endpoint Security (HX) servers will be synchronized automatically. Prerequisites - Admin access To set the date and time: 1. Click the **Settings** tab. 2. Click **Date and Time** on the sidebar. 3. Select the date and time from the drop-down lists. 4. Click **Update Time**. 5. Set the time zone as described in [Time zone configuration](/docs/time-zone-configuration-3) . :