--- title: "Setting the Sensor throughput threshold for specific devices" slug: "setting-the-sensor-throughput-threshold-for-specific-devices-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:31Z published: 2026-11-19T12:29:31Z canonical: "docs.trellix.com/setting-the-sensor-throughput-threshold-for-specific-devices-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting the Sensor throughput threshold for specific devices A fault is generated when the throughput % drops below a certain value. This is helpful on very busy networks, where a certain amount of traffic is always expected to be seen. This type of fault is a good indication that there is a communication problem on the network. Follow this procedure for setting the Sensor throughput threshold for a specific device within a domain. 1. From the Performance Monitoring node, select **Devices > ** > Devices > ** > Setup > Performance Monitoring > Thresholds**. The **Metrics** tab opens by default. 2. Select the **High**, **Medium**, or **Low** row in **Sensor Throughput Usage** and enter the required threshold percentage in the **Threshold** field. This value should be higher than the value in the **Reset Threshold** field. 3. (Optional) Select the **Generate Fault** checkbox. 4. Click **Save**.