--- title: "Setting the Tools menu password in plain text using the CLI" slug: "setting-the-tools-menu-password-in-plain-text-using-the-cli-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/setting-the-tools-menu-password-in-plain-text-using-the-cli-4" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting the Tools menu password in plain text using the CLI Use the commands in this section to set the Tools menu password in plain text. **To set a plain-text password:** 1. Log into the appliance CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostame # configure terminal ``` 3. Set the password: ``` hostname (config) # boot bootmgr tools password ``` 4. Save your change: ``` hostname (config) # write memory ``` > [!NOTE] > Note > > Alternatively, you can use the `boot bootmgr tools password 0 <password>` command to set the password in plain text, or use the `boot bootmgr tools password` command and enter the plain-text password at the prompt. ### Example The following example sets "fyd4k8q2" as the password for the Tools menu. ``` hostname (config) # boot bootmgr tools password fyd4k8q2 ```