--- title: "Setting up HTTP servers using the Web UI" slug: "setting-up-http-servers-using-the-web-ui-2" updated: 2026-08-25T21:18:03Z published: 2026-08-25T21:18:03Z canonical: "docs.trellix.com/setting-up-http-servers-using-the-web-ui-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting up HTTP servers using the Web UI Use the **View and add HTTP Servers** section on the **HTTP** tab of the **Notification Settings** page to add and configure HTTP servers. ![All_HTTPServerListing_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-dfcc26f5-5248-afb6-5639-8fd528bcf779.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A34Z&se=2026-11-20T12%3A08%3A34Z&sr=c&sp=r&sig=CBYCrsYlNxgvgNUWweP99UuDS6n%2BomW6oLqDEKujSDY%3D)To add an HTTP server: 1. Click the **Settings** tab. 2. Click **Notifications** on the side bar. 3. Click the **HTTP** tab and locate the **View and add HTTP Servers** section. 4. Click **Add HTTP Server**. The **Add New HTTP Server** dialog box opens. 5. Enter the name of the HTTP server that will post the notification (for example, NX7400 or HX4500) in the **Server name** box. ### Note Do not enter URLs and email addresses in the **Server name** box. 6. Select the **Enabled** checkbox to choose which servers will post HTTP notifications. 7. Click **Update HTTP Server**. 8. Enter the URL of the server to post the HTTP notification in the **Server Url** box. 9. Leave the **User** box blank. This option will be deprecated. 10. Select the **Alerts Update Notification** checkbox to choose which servers will post HTTP notifications when ATI alert updates are detected. 11. (Optional) If authentication is required for the server, select the **Auth** checkbox. If you checked the Auth checkbox, you must also enter a username and password. - Enter the user name for HTTP authentication in the **Username** box. - Enter the password for HTTP authentication in the **Password** box. 12. (Optional) If you want to use SSL for notifications, select the **SSL Enable** checkbox and **SSL Verify** checkboxes. 13. Select the event type or **All Events** in the **Events Notification** drop-down list box to post HTTP notifications when the specified events are detected. ### Note Selections on the **Summary** tab take precedence over your selection here. For example, if you globally disable an event type on the **Summary** tab, no alert notifications will be sent for that event type, regardless of your selection in this drop-down list box. 14. Select the delivery frequency in the **Delivery** drop-down list box: - **Per Event** (recommended)—Send a notification each time an event of this type occurs. - **Default**—Use the delivery frequency specified in the Default delivery box in the HTTP Settings area. - **Daily Digest**—Send a daily notification of specified events detected in the past 24 hours in the selected format and level of details (default is Concise). 15. Select a service provider in the **Default provider** drop-down list box. The default service provider is **Generic**. ### Note Trellix recommends using the generic service provider. 16. Select **XML**, **JSON**, or **Text** as the notification format and select which level of detail is provided in the **Message Format** drop-down list box. Select **Default** to use the format specified in the Default format box in the HTTP Settings area. - **Normal**—This format contains detailed information and abstracts, such as alert type, ID, source IP, malware name, hostname, and alert URL without redundant information. - **Concise**—This format contains basic information, such as alert type, ID, source IP, malware name, hostname, and alert URL. - **Extended**—This format contains detailed information and abstracts, including data-theft information (if any) and static-analysis details. This format provides all details about files and objects modified during analysis. 17. Click **Add New HTTP Server**. To modify the HTTP server listing: 1. Click the **Settings** tab. 2. Click **Notifications** on the side bar. 3. Click the **HTTP** tab and locate the **View and add HTTP Servers** section. 4. Click the **HTTP** link in the table header. 5. Click the server in the **Name** column in the **View and add HTTP Servers** section. 6. Click the icon in the **Edit** column. 7. Update the settings as needed. To enable or disable an HTTP server: 1. Click the **Settings** tab. 2. Click **Notifications** on the side bar. 3. Click the **HTTP** tab and locate the **View and add HTTP Servers** section. 4. Select the checkbox next to the server. 5. Click **Enable** or **Disable**. 6. Click **Yes** to confirm the action. To remove an HTTP server: 1. Click the **Settings** tab. 2. Click **Notifications** on the side bar. 3. Click the **HTTP** tab and locate the **View and add HTTP Servers** section. 4. Select the checkbox next to the server. 5. Click **Remove**. 6. Click **Yes** to confirm the action. :