--- title: "Setting up SNMP servers using the Web UI" slug: "setting-up-snmp-servers-using-the-web-ui-3" updated: 2026-08-25T21:17:55Z published: 2026-08-25T21:17:55Z canonical: "docs.trellix.com/setting-up-snmp-servers-using-the-web-ui-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting up SNMP servers using the Web UI Use the **SNMP trap sink listing** section on the **SNMP** tab of the **Notification settings** page to add and configure SNMP servers. ![All_SNMPTrapSinkSettings_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-75a01585-f749-770b-dca0-d2235fc4f6b7(1).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A44%3A13Z&se=2026-11-20T09%3A44%3A13Z&sr=c&sp=r&sig=vvXMvTorRYey81H0vct%2Fn9ply5DwHuleeen76Oe1J5E%3D)To add an SNMP server: 1. Click **Settings**. 2. Click **Notifications** on the side bar. 3. Click the **SNMP** tab. 4. Click **Add SNMP trap sink**. The **Add new SNMP trap sink** dialog box opens. 5. Enter the name of the SNMP server to receive the notifications in the **Trap sink name** box and click **Add New SNMP trap sink**. 6. Enter the IP address of the SNMP server in the **IP Address** box. 7. Enter the SNMP community string in the **Community** box. 8. Select the **Enabled** checkbox to enable the server to receive SNMP notifications. 9. Select the delivery frequency in the **Delivery** drop-down list box. - **Default**—Use the delivery frequency specified in the Default delivery box in the SNMP Settings area. - **Per Event** (recommended)—Send a notification each time an event of this type occurs. 10. Select the event type or **All events** in the **Notification** drop-down list box to send SNMP notifications when the specified events are detected. 11. Select the SNMP version (**1** or **2c**) to use for the notification in the **Version** drop-down list box. Select **Default** to use the version specified in the **Define protocol settings** section. 12. Click **Add New SNMP Trap Sink**. To update SNMP server settings: 1. Click **Settings**. 2. Click **Notifications** on the side bar. 3. Click the **SNMP** tab. 4. Click the server in the **Name** column. 5. Click the icon in the **Edit** column. 6. Update settings as needed. 7. Click **Update SNMP trap sink**. :