--- title: "Setting up SNMP servers" slug: "setting-up-snmp-servers" updated: 2026-09-08T21:44:57Z published: 2026-09-08T21:44:57Z canonical: "docs.trellix.com/setting-up-snmp-servers" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting up SNMP servers To set up the SNMP servers, perform the following subtasks: - Add the SNMP servers - Configure the SNMP servers To add an SNMP server: 1. Enable the CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. Enable SNMP notifications: `hostname (config) # fenotify snmp enable` 3. Specify the name of the SNMP server (for example, AX5400) for SNMP notifications: `hostname (config) # fenotify snmp trap-sink sink_name` 4. Specify which servers will receive SNMP notifications (one server per command): `hostname (config) # fenotify snmp trap-sink sink_name enable` 5. Specify the IP address or DNS address of the SNMP server to receive the notifications: `hostname (config) # fenotify snmp trap-sink sink_name address ip address` 6. Save the configuration: `hostname (config) # write memory` To configure the SNMP servers: 1. Enable the CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. Enable SNMP notifications: `hostname (config) # fenotify snmp enable` 3. Specify the SNMP community string: `hostname (config) # fenotify snmp trap-sink sink_name community community_name` 4. Specify the SNMP version used for notifications: - To use SNMP version 1, enter: `hostname (config) # fenotify snmp trap-sink sink_name version 1` - To use SNMP version 2c, enter: `hostname (config) # fenotify snmp trap-sink sink_name version 2c` 5. Specify that a notification is sent each time a malware object is detected: `hostname (config) # fenotify snmp trap-sink sink_name prefer message delivery per-event` 6. Save the configuration: `hostname (config) # write memory` :