--- title: "show" slug: "show-1" tags: ["Reference", "IPS 10.1.10"] updated: 2026-09-23T09:41:20Z published: 2026-09-23T09:41:20Z canonical: "docs.trellix.com/show-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show Upon execution, this command displays all the current configuration settings on the Sensor, such as the model, installed software version, IP address, and Manager details. This command has no parameters. **Syntax**: show Information displayed by the show command includes the following: [Sensor Info] - System Name - Date - System Uptime - System Type - System serial number (displays the primary, secondary and master/system serial numbers separately in case of NS9300) - Software Version - Hardware Version - MGMT Ethernet Port - MGMT port Link Status [Sensor Network Config] - IP Address - Netmask - Default Gateway - SSH Remote Logins [Manager Config] Self Signed cert support - Install TCP Port - Alert TCP Port - Logging TCP Port CA Signed cert support - Install TCP Port - Alert TCP Port - Logging TCP Port - FIPS Mode - Admin SSH/Console Access **Sample Output:** For Sensor, the output is as shown: intruShell@john> show [Sensor Info] System Name : NS9300 Date : 7/12/2018 - 9:14:9 UTC System Uptime : 03 hrs 15 min 35 secs System Type : IPS-NS9300 Serial Number : J021834009 Software Version : 9.1.166.26 Hardware Version : 1.30 MGMT Ethernet port : auto negotiated MGMT port Link Status : link up [Sensor Network Config] IP Address : 10.213.174.202 Netmask : 255.255.255.0 Default Gateway : 10.213.174.201 SSH Remote Logins : enabled [Manager Config] Self Signed cert support Install TCP Port : 8501 Alert TCP Port : 8502 Logging TCP Port : 8503 CA Signed cert support Install TCP Port : 8506 Alert TCP Port : 8507 Logging TCP Port : 8508 **Applicable to:** NS-series Sensors