--- title: "show" slug: "show-5" tags: ["Certification", "IPS 11.1.x"] updated: 2026-10-01T07:58:57Z published: 2026-10-01T07:58:57Z canonical: "docs.trellix.com/show-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show Upon execution, this command displays all the current configuration settings on the Sensor, such as the model, installed software version, IP address, and Manager details. This command has no parameters. **Syntax**: `show` Information displayed by the `show` command includes the following: [Sensor Info] - System Name - Date - System Uptime - System Type - System serial number (displays the primary, secondary and master/system serial numbers separately in case of NS9300) - Software Version - Hardware Version - MGMT Ethernet Port - MGMT port Link Status [Sensor Network Config] - IP Address - Netmask - Default Gateway - SSH Remote Logins [Manager Config] Self Signed cert support - Install TCP Port - Alert TCP Port - Logging TCP Port CA Signed cert support - Install TCP Port - Alert TCP Port - Logging TCP Port - FIPS Mode - Admin SSH/Console Access **Sample Output:** For Sensor, the output is as shown: `intruShell@NS3200_FIPS> show` `[Sensor Info] System Name : NS3200_FIPS` `Date : 1/15/2024 - 16:1:3 UTC` `System Uptime : 41 days 21 hrs 34 min 46 secs` `System Type : IPS-NS3200` `System Mode : Standalone` `Serial Number : 0123456789` `Software Version : 11.1.17.x` `Hardware Version : 1.10` `MGMT Ethernet port : auto negotiated` `MGMT port Link Status : link up` `[Sensor Network Config]` `IP Address : 10.x.x.x` `Netmask : 255.255.255.0` `Default Gateway : 10.x.x.x` `Default SCPserver : 10.x.x.x` `SSH Remote Logins : enabled` `[Manager Config]` `Manager IP addr : 10.x.x.x (primary intf)` `Install TCP Port : 8501` `Alert TCP Port : 8502` `Logging TCP Port : 8503` `FIPS Mode : Enabled` `Admin SSH/Console Access: Enabled`