--- title: "show aggregator configuration" slug: "show-aggregator-configuration" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:34Z published: 2026-08-04T17:21:34Z canonical: "docs.trellix.com/show-aggregator-configuration" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show aggregator configuration Displays the configuration of the aggregator. ### Syntax `show aggregator configuration` ### Parameters None. ### Example The following example shows the configuration of the aggregator: ``` cm-01 # show aggregator configuration Aggregator Configuration:   Enabled:                        no   State:                          stopped   Number of workers:              2   Health status update interval:  4 sec   Endpoint ping interval:         15 sec   WebSocket time-out:             30 sec   Connection broken threshold:    300 sec   Log level:                      notice   Log message maximum size:       4096 bytes   SSL Configuration:     SSL minimum version:          tls1     SSL cipher list:              compatible     Verify SSL certificate:       yes Job Configuration:   Minimum retry interval:      300 sec Configured Objects:   Object alert enabled   Object correlated enabled ``` ### User role Admin, Monitor, or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Release 7.9