--- title: "show aggregator endpoints configuration" slug: "show-aggregator-endpoints-configuration" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:34Z published: 2026-08-04T17:21:34Z canonical: "docs.trellix.com/show-aggregator-endpoints-configuration" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show aggregator endpoints configuration Displays aggregator endpoints configuration. ### Syntax `show aggregator endpoints configuration` ### Parameters None. ### Example The following example shows the configuration of aggregator endpoints: ``` cm-01 # show aggregator endpoints configuration Endpoint           Address                                           Enabled  Type       User ---------          -------                                           -------  ---------  ------ strider_iad_etp    wss://iad-cc-api-vip-stage-1.cso.fireeye.com      yes      etp        engtest ``` ### User role Admin, Monitor, or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Release 7.9