--- title: "show bonds" slug: "show-bonds" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:34Z published: 2026-08-04T17:21:34Z canonical: "docs.trellix.com/show-bonds" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show bonds Displays configuration information about all bonding parameters. ### Syntax `show bonds` ### Parameters None ### Output fields The following table describes the output fields for the **show bonds** command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | Enabled | When enabled, creates a named bonded interface. | | Mode | The bonded interface mode. | | Link Monitor Time | The time (in milliseconds), to wait before enabling a slave after a link recovery/link failure has been detected for a specified bonded interface. | | Interfaces | Named interfaces. | ### Example The following example displays the malware analysis statistics: ``` hostname # show bonds ``` ``` Enabled                         :    Yes ``` ``` Mode                           :    link-agg ``` ``` Link Monitor time              :    100 ``` ``` Interfaces                      :    ether1, ether2 ``` ### User role Admin, Operator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Malware Analysis**: Release 10.0.1 and later.