--- title: "show bootvar" slug: "show-bootvar" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:34Z published: 2026-08-04T17:21:34Z canonical: "docs.trellix.com/show-bootvar" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show bootvar To display all appliance boot images and identify the active default boot partition, use the `show bootvar` command in standard mode. ### Syntax `show bootvar` ### Parameters None ### Example The following example shows the current appliance boot image information. ``` hostname > show bootvar Installed images: Partition 1: cms CMS (CMS) 7.6.0.342929 #342929 2015-04-14 00:44:28 x86_64 build@vta114:Fi  reEye/mammoth-dev (eng debug) Partition 2: cms CMS (CMS) 7.6.0.346695 #346695 2015-04-22 22:57:09 x86_64 build@vta114:Fi  reEye/mammoth-dev (eng) Last boot partition: 2 Next boot partition: 2 Boot manager password status: password disabled. Image signing: trusted signature always required Admin require signed images: no (not active) Settings for next boot only: Fallback reboot on configuration failure: yes (default) ``` ### User role Admin, Monitor, or Operator ### Supported appliances Command introduced before Release 7.6.0. **Endpoint Security (HX):** Release 2.5