--- title: "show cmc client" slug: "show-cmc-client" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:34Z published: 2026-08-04T17:21:34Z canonical: "docs.trellix.com/show-cmc-client" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show cmc client Displays information about how managed appliances connect to and authenticate with the Central Management System appliance. > [!NOTE] > Note > > The Central Management Console (CMC) is the Central Management System appliance component that provides basic management and control capabilities for both the server (Central Management System appliance) and its clients (managed appliances). ### Syntax `show cmc client` ### Parameters None ### Example The following example displays CMC information about the managed appliances from the Network Security appliance. ``` hostname # show cmc client CMC client enabled: yes CMC server connection status:   Connected:                 yes   CMC server hostname:       cm-01   CMC server IP address:     172.10.1.1   Last connection failure:   None   Last connection breakage:  None   Connection last formed:    2014/12/23 21:13:37   Connection last broken:    2014/12/23 21:13:36   Last connection attempt:   2014/12/23 21:13:36   Next connection attempt:     Current time:              2014/12/26 19:03:55   Client username on server: admin   Server username on client: admin Configuration for client-initiated connections:   Server address:                172.10.1.1     Server port:                   22   Auto-connect:                  yes   Username for server requests:  admin    Authentication:      Authentication type: password      password username: admin      password password: ********      ssh-dsa2 username: cmcclient      ssh-dsa2 identity:      ssh-rsa2 username: cmcclient      ssh-rsa2 identity: General CMC client configuration:   Transmit bandwidth limit:           unlimited   Confirm configuration if managed:   yes Validation for server-initiated connections:   Source address:   (same as main address)   Source port:      (no restriction)   Require match:    no ``` ### User role Admin, Monitor, or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Before Release 7.5 - **Endpoint Security (HX):** Release 2.5