--- title: "show cmc rendezvous" slug: "show-cmc-rendezvous" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:43Z published: 2026-08-04T17:21:43Z canonical: "docs.trellix.com/show-cmc-rendezvous" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show cmc rendezvous Displays current information about the rendezvous process. On the Central Management System appliance, this includes the list of clients that requested rendezvous and are waiting to be accepted. On appliances, this is the rendezvous status and whether the appliance is currently under management. > [!NOTE] > Note > > The Central Management Console (CMC) is the Central Management System appliance component that provides basic management and control capabilities for both the server (Central Management System appliance) and its clients (managed appliances). ### Syntax `show cmc rendezvous` ### Parameters None ### Examples The following example displays the rendezvous information from the Network Security appliance. ``` nx-02 # show cmc rendezvous CMC rendezvous service name:  cmc CMC client:   Server address:  cmc   Automatic rendezvous:  no   Initial retry delay (after boot or disconnect):  30 seconds   Short retry interval (after unsuccessful announcement):  300 seconds   Long retry interval (after successful announcement):  86400 seconds   Include client address in rendezvous:  yes   Use client initiated connection's config for rendezous:  yes   Under CMC management:  yes   How to authenticate to server for rendezvous:      Authentication type:  password      Password for password auth:  ******** ``` The following example shows the rendezvous information from the Central Management System appliance. ``` cm-01 # show cmc rendezvous CMC rendezvous service name: cmc CMC server:   Server rendezvous enabled: yes   Auto-accept enabled:       no   No clients awaiting approval.   Default authentication configuration for new clients:      Authentication type: password      password username: admin      password password: ********      ssh-dsa2 username:      ssh-dsa2 identity: <      ssh-rsa2 username:      ssh-rsa2 identity: ``` ### User role Admin, Monitor, or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Before Release 7.5 - **Endpoint Security (HX):** Release 2.5