--- title: "show commbroker config" slug: "show-commbroker-config" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:43Z published: 2026-08-04T17:21:43Z canonical: "docs.trellix.com/show-commbroker-config" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show commbroker config Displays the configuration of the Comm Broker module. ### Syntax `show commbroker config` ### Parameters None ### Example The following example displays the Comm Broker input modules for syslog and JSON events, configured on the ether1 interface, transported over UDP on ports 515 and 516 (respectively). ``` hostname # show commbroker config     input module: syslog     interface: ether1     Ports: 515     proto: udp     input module: json     interface: ether1     Port: 516     proto: udp ``` ### User role Admin or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.9