--- title: "show datastreaming configuration helix" slug: "show-datastreaming-configuration-helix" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:43Z published: 2026-08-04T17:21:43Z canonical: "docs.trellix.com/show-datastreaming-configuration-helix" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show datastreaming configuration helix Shows the Trellix datastreaming configuration for Helix Enterprise. > [!NOTE] > Note > > Starting in Release 9.0.0, the Helix Enterprise datastreaming configuration is shown in the `show datastreaming helix` command output. ### Syntax `show datastreaming configuration helix` ### Parameters None ### Example The following example allows you to view the Helix Enterprise datastreaming configuration. ``` hostname # show datastreaming configuration helix       Helix Configuration:        Helix enabled                 :    no        Helix FQDN                    :    10.11.118.60        Helix bootstrap certificate   : ``` ### User role Admin or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Email Security — Server:** Release 8.4.0 The command was deprecated in Release 9.0.0.