--- title: "show dospreventionseverity" slug: "show-dospreventionseverity-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-dospreventionseverity-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show dospreventionseverity This command displays the severity for a specified denial-of-service profile. It also displays the DoS prevention severity information for different measures. **Syntax:** `show dosPreventionseverity <dos-measure-name> <inbound | outbound>` | Parameter | Description | | --- | --- | | | Indicates the DoS measure name: one of 'tcp-syn', 'tcp-syn-ack', 'tcp-fin', 'tcp-rst', 'udp', 'icmp-echo', 'icmp-echo-reply', 'icmp-non-echo-reply', 'ip-fragment', 'non-tcp-udp-icmp' | | | Indicates the direction. It can be 'inbound' or 'outbound'. | | | Indicates the interface port | `show dospreventionseverity intfport (g0/1 | g0/2 | g1/1 | g1/2 | g1/3 | g1/4 | g1/5 | g1/6 | g1/7 | g1/8 | g1/9 | g1/10 | g1/11 | g1/12 | g2/1 | g2/2 | g2/3 | g2/4 | g2/5 | g2/6 | g2/7 | g2/8 | g2/9 | g2/10 | g2/11 | g2/12 | g3/1 | g3/2 | g3/3 | g3/4 | g3/5 | g3/6 | g3/7 | g3/8 | g4/1 | g4/2 | g5/1 | g5/2 | g5/3 | g5/4 | g5/5 | g5/6 | g5/7 | g5/8 | g5/9 | g5/10 | g5/11 | g5/12 | g6/1 | g6/2 | g6/3 | g6/4 | g6/5 | g6/6 | g6/7 | g6/8 | g6/9 | g6/10 | g6/11 | g6/12 | g7/1 | g7/2 | g7/3 | g7/4 | g7/5 | g7/6 | g7/7 | g7/8) (tcp-syn|tcp-syn-ack|tcp-fin|tcp-rst|udp|icmp-echo|icmp-echo-reply|icmp-non-echo-echoreply|ip-fragment|non-tcp-udp-icmp) (inbound|outbound)` **Sample Output:** `intruShell@Sensor-9500> show dospreventionseverity tcp-syn-ack outbound` `DOS Prevention Severity for tcp-syn-ack outbound is 30` **Example 1**: `show dospreventionSeverity tcp-syn-ack outbound` **Example 2**: `show dospreventionprofile intfport g2/3 tcp-syn inbound` **Applicable to:** NS-series Sensors > [!NOTE] > Note > > `show dospreventionprofile intfport` command is applicable only for NS9300 Sensors.