--- title: "show email-analysis mta mynetworks" slug: "show-email-analysis-mta-mynetworks" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:43Z published: 2026-08-04T17:21:43Z canonical: "docs.trellix.com/show-email-analysis-mta-mynetworks" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show email-analysis mta mynetworks Displays a single IP address or multiple IP addresses in the MTA access restriction list. Both IPv4 and IPv6 addresses are supported. > [!NOTE] > Note > > The internal loopback address is not displayed in the `show email-analysis mta mynetworks` command output. Only values that you entered are displayed. ### Syntax `show email-analysis mta mynetworks` ### Parameters None ### Examples The following example shows that all MTA hosts are restricted except the specified IPv4 address. ``` hostname # show email-analysis mta mynetworks 172.16.183.3 ``` The following example shows that all MTA hosts are restricted except the specified IPv6 address. ``` hostname # show email-analysis mta mynetworks [2001:470:84a7:3066::aa0] ``` The following example shows that all MTA hosts are restricted except the specified three IPv4 addresses. ``` hostname # show email-analysis mta mynetworks 192.168.5.5 192.168.65.4 172.16.244.10 ``` The following example shows that all MTA hosts are restricted except the specified two IPv4 addresses and one IPv6 address. ``` hostname # show email-analysis mta mynetworks 192.168.5.5 192.168.65.4 [2001:470:84a7:3066::aa0] ``` The following example shows that all MTA hosts are restricted except one IPv4 address and mask with one IPv6 address and mask. ``` hostname # show email-analysis mta mynetworks 192.168.0.0/16 [2001:470:84a7:3066::/64] ``` The following example shows the default configuration for both IPv4 and IPv6. ``` hostname # show email-analysis mta mynetworks 0.0.0.0/0 [::/0] ``` ### User role Admin, Operator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Email Security — Server:** Before Release 6.4. IPv6 addresses are supported in Release 8.0.