--- title: "show event-filter tapsender configuration all" slug: "show-event-filter-tapsender-configuration-all" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/show-event-filter-tapsender-configuration-all" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show event-filter tapsender configuration all Displays the event filters configured for all event types. Event rules filter out all events that are sent from an Network Security appliance to Helix Enterprise for a specified event type or for all event types. > [!NOTE] > Note > > Helix Enterprise integration is not supported on the NX x3xx appliances and the NX 10000 appliance. ### Syntax `show event-filter tapsender configuration all` ### Parameters None ### Example The following example shows that the configured event filter rules are applied. ``` hostname # show event-filter tapsender configuration all Filtering all events: Yes ``` ### User role Admin, Operator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.2.2