--- title: "show events [<event_ID>]" slug: "show-events-event-id" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/show-events-event-id" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show events [<event_ID>] Displays detailed information about events. ### Syntax `show events [<event_ID>]` ### Parameters `<event_ID>` Specific event job number. ### Output fields The following table describes the output fields for the `show events` command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | Occurrence Time | Time that the event occurred. | | Interface | Type of interface that was active. | | Action | Type of action that was taken. The policy is specified in parentheses. | | Event Type | Type of event that was identified. | | Analysis Type | Type of analysis that is associated with an event. | | Trace ID | Specific trace job number that is associated with an event. | | Malware ID | Specific malware analysis job number. | | Source IP | IP address of the source. | | Destination IP | IP address of the destination. | | Source MAC | MAC address of the source. | | Destination MAC | MAC address of the destination. | | VLAN ID | Network VLAN job number that is associated with an event. | | Attacked Port | Port number that is associated with an attack. | | IP Protocol | Type of IP protocol that is used to transport the threat. | | Original Malware ID | If a malware sample is a duplicate of an original sample, the duplicate displays the information from the original malware analysis job number. | | PCAP URL | Packet capture (PCAP) link that is associated with an event. | | Event Page URL | Specific link that is associated with an event. | ### Example The following example displays detailed information about event number 3. ``` hostname # show events 3 Event 3:   Occurrence Time        : 2015-09-30 23:45:15 PDT   Interface              : any   Action                 : notified (default policy): 0   Event Type             : checksum-match   Analysis Type          : Binary Analysis   Trace ID               : 1   Malware ID             : 1      Source IP           : 115.52.174.36      Destination IP      : 124.151.168.211      Source MAC          : 00:0C:29:28:84:3F      Destination MAC     : 00:03:47:4E:69:AA      VLAN ID             : 0      Attacked Port       : 80      IP Protocol         : tcp      Original Malware ID : 0      Match Type          : av-match      Name                : Mal/Whybo-A      EDP Page URL        : https://mil.fireeye.com/edp.php?sname=Mal/Whybo-A      PCAP URL            : https://172.16.146.84/event_stream/send_pcap_file?ev_id=3      PCAP URL (TEXT)     : https://172.16.146.84/event_stream/send_pcap_ascii?ev_id=3      Event Page URL      : https://172.16.146.84/event_stream/events?event_id=3 ``` ### User role Admin, Operator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Before Release 7.5