--- title: "show failover-status" slug: "show-failover-status-5" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:31Z published: 2026-11-19T12:29:31Z canonical: "docs.trellix.com/show-failover-status-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show failover-status This command shows whether failover is enabled on the Sensor and the status of the peer Sensor. You can run the command from either Sensor. The output includes the fields Failover Enabled (must be YES) and Peer Status (must be UP). The former indicates whether the Sensor on which the command is issued has been configured to be part of a HA pair, and the latter shows the current state of the communication between the two Sensors.