--- title: "show failover-status" slug: "show-failover-status-7" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-failover-status-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show failover-status This command shows whether failover is enabled on the Sensor, the status of the peer Sensor, and the fail-open action of the Sensor. **Syntax**: `show failover-status` Information displayed by the `show failover-status` command includes the following: - **Failover Enabled:** The command will return - - **YES:** If failover is enabled - **NO:** If failover is disabled - **UNKNOWN:** If it is not explicitly set - **Peer Status:** Shows if failover is enabled, and whether the peer Sensor is UP or DOWN - **Fail-open Action:** Shows whether the monitoring port for fail-open is enabled or disabled > [!NOTE] > Note > > When you enable fail-open on a HA pair, the same monitoring ports are enabled for fail-open on both the primary and secondary Sensors. **Applicable to:** NS-series Sensors