--- title: "show fe-access" slug: "show-fe-access" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:22Z published: 2026-08-04T17:22:22Z canonical: "docs.trellix.com/show-fe-access" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show fe-access Displays the configuration and status of any connections to Trellix Customer Support through reverse SSH tunneling. ### Syntax `show fe-access` ### Parameters None ### Examples The following example indicates that a proxy is not enabled and that the Trellix appliance is connected to Trellix Customer Support through reverse SSH tunneling. ``` hostname # show fe-access fe-access is enabled. username: feaccess password: ******** timeout: 48 hours hostname: 10.17.153.50 port num: 443 base port: 0 fe-access proxy is disabled. fe-access is connected. connection established: Thu Feb 20 23:23:36 2013 time remaining: 47 hours 59 minutes and 57 seconds number of incoming ssh connections: 0 number of incoming web connections: 0 ``` The following example indicates that a proxy is enabled using the Trellix proxy server. ``` hostname # show fe-access fe-access proxy is enabled. fe-access proxy is using its own settings (not fenet settings) proxy hostname: 10.16.50.107 proxy port num: 3128 proxy username: test proxy password: ******** fe-access is connected. connection established: Thu Mar 21 23:28:15 2013 time remaining: 47 hours 59 minutes and 57 seconds number of incoming ssh connections: 0 number of incoming web connections: 0 ``` ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **HX Series**: Release 2.5