--- title: "show fenet dti proxy configuration" slug: "show-fenet-dti-proxy-configuration" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:26Z published: 2026-08-04T17:22:26Z canonical: "docs.trellix.com/show-fenet-dti-proxy-configuration" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show fenet dti proxy configuration Shows basic configuration settings for the DTI cache on the Central Management System appliance. > [!NOTE] > Note > > These configuration settings should be changed only under the guidance of Trellix Technical Support. ### Syntax `show fenet dti proxy configuration` ### Parameters None ### Output fields The following table describes the output fields for this command. | Field | Description | | --- | --- | | DTI Proxy Cache State | Whether the cache proxy is running. | | Listening Port | The port the cache proxy listens to for incoming requests from the Central Management System appliance. | | Cache Size | The size of the DTI cache, in megabytes. | | Maximum Cache-able Object Size | The maximum size for a file in the DTI cache, in bytes. | | Minimum Cache-able Object Size | The minimum size for a file in the DTI cache, in bytes. | ### Example The following example shows basic DTI cache configuration. ``` cm-02 > show fenet dti proxy configuration DTI Cache Proxy State:            running DTI Cache Proxy Configurations:  Listening Port:                   8443  Cache Size:                       130000 MB  Maximum Cache-able Object Size:   26843545600 bytes  Minimum Cache-able Object Size:   1 bytes ``` ### User role Admin, Operator, or Monitor ### Command mode Standard ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Release 7.7