--- title: "show fenet update config" slug: "show-fenet-update-config" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:26Z published: 2026-08-04T17:22:26Z canonical: "docs.trellix.com/show-fenet-update-config" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show fenet update config Shows the default upgrade settings. ### Syntax `show fenet update config` ### Parameters None ### Output Fields The following table describes the output fields for this command. | Field | Description | | --- | --- | | Task | Upgrade task | | Timeout | Time in seconds before task quits | | Max retry | Maximum number of times a task is retried | | Parallel exec | Whether this task will execute in parallel | ### Example The following example shows the default upgrade settings for an appliance. ``` hostname > show fenet update config Update Config:  Task:               gi-check    Timeout:          60    Max retry:        0    Parallel exec:    no  Task:               gi-download    Timeout:          86400    Max retry:        2    Parallel exec:    no  Task:               gi-install    Timeout:          600    Max retry:        2    Parallel exec:    no  Task:               image-boot-next    Timeout:          300    Max retry:        2    Parallel exec:    no  Task:               image-check    Timeout:          60    Max retry:        2    Parallel exec:    yes  Task:               image-fetch    Timeout:          600    Max retry:        2    Parallel exec:    no  Task:               image-install    Timeout:          600    Max retry:        2    Parallel exec:    no  Task:               image-prep-reboot    Timeout:          600    Max retry:        2    Parallel exec:    no  Task:               image-reboot    Timeout:          900    Max retry:        2    Parallel exec:    no ``` ### User role Admin, Operator, or Monitor ### Command mode Standard ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Release 7.9.0