--- title: "show file-analysis" slug: "show-file-analysis" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:26Z published: 2026-08-04T17:22:26Z canonical: "docs.trellix.com/show-file-analysis" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show file-analysis Displays statistics about the total number of file objects that were analyzed. This command displays cumulative statistics such as the total number of files that were submitted for analysis and the total number of events that were detected. It also shows the total number of objects with each system status type. For more information, see the *File Protect User Guide*. ### Syntax `show file-analysis` ### Parameters None ### Example The following command displays file analysis statistics. ``` hostname # show file-analysis Total Objects Submitted                     :   24978   Objects Analyzed                         :   24978   Objects identified as Malicious          :   15229      - VM verified                         :   15175      - Duplicate to VM verified            :      54      - Known checksum match                :       0 Total events                                :   97165   vm-signature-match events                :   32577   os-change-anomaly  events                :   30626   checksum-match     events                :   25083   vm-outbound-comm   events                :    8879 Objects break down by system status, Total  :   24978   Submitted for VM analysis                :   20259   VM Submit Error                          :      20   Duplicate                                :    3657   Static Analysis Only                     :       5   Aborted                                  :    1037 ``` ### User role Admin, Operator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **File Protect:** Before Release 7.5. The command output was enhanced to display the additional static analysis statistics in Release 7.7.