show files

Displays the file system information, lists the debug, statistics, or TCP dump files on the system, or displays the contents of a specific debug file.

Syntax

show files {debug-dump [file name] | stats | system [detail | all] | tcpdump}

Parameters

debug-dump [file name]

Displays the list of debug-dump files or the contents of the specified file.

stats

Displays the list of statistical reports.

system [detail | all]

Displays the file system information. Use the detail option to display additional detailed information (see example below). Use the all option to display a comprehensive list of system information.

tcpdump

Displays the list of TCP dump files.

Example

The following example displays file system information details.

hostname # show files system detail
Statistics for /config filesystem:
  Space Total 190 MB
  Space Used 5 MB
  Space Free 185 MB
  Space Available 175 MB
  Space Percent Free 97%
  Inodes Total 50400
  Inodes Used 23
  Inodes Free 50377
  Inodes Percent Free 99%
  Device Name /dev/sda8

Statistics for /var filesystem:
  Space Total 8068 MB
  Space Used 970 MB
  Space Free 7098 MB
  Space Available 6689 MB
  Space Percent Free 87%
  Inodes Total 1050400
  Inodes Used 903
  Inodes Free 1049497
  Inodes Percent Free 99%
  Device Name /dev/sda9

Statistics for /data filesystem:
  Space Total 448683 MB
  Space Used 52258 MB
  Space Free 396425 MB
  Space Available 373633 MB
  Space Percent Free 88%
  Inodes Total 58359808
  Inodes Used 2227
  Inodes Free 58357581
  Inodes Percent Free 99%
  Device Name /dev/sda10

Command mode

Enable

Supported appliances

This command is supported on the following appliances running the specified releases or later: