--- title: "show fmps s3-onprem config" slug: "show-fmps-s3-onprem-config" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:26Z published: 2026-08-04T17:22:26Z canonical: "docs.trellix.com/show-fmps-s3-onprem-config" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show fmps s3-onprem config Shows the configured user credentials that are required to connect to an S3 on-prem storage. ### Syntax `show fmps s3-onprem config` ### Parameters None ### Output fields The following table describes the output fields for the `show fmps s3-onprem config` command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | Hostname | The host IP address where the S3 on-prem storage is maintained. | | Port | The port number on which the S3 APIs are enabled on the S3 on-prem storage. Make sure you enter a port value supporting HTTPS. HTTP ports are not supported. | | Shared Access Key | Access ID key retrieved from the S3 on-prem storage host. | ### Example The following example displays the configured user credentials for an S3 on-prem storage. ``` hostname (config) # show fmps s3-onprem config S3 On-Prem Configuration    Hostname:          165.10.13.12    Port:              6545    Shared Access Key: 5RTYED3R4DSDFTR4F ``` ### User role Monitor, Analyst, Operator, or Admin ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **File Protect:** Release 10.0.2