--- title: "show ha interfaces" slug: "show-ha-interfaces" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:26Z published: 2026-08-04T17:22:26Z canonical: "docs.trellix.com/show-ha-interfaces" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ha interfaces Displays the status of the default and backup HA interfaces on a Central Management System High Availability (HA) cluster. > [!NOTE] > Note > > For more information about Central Management System HA, see the Central Management System High Availability Guide. ### Syntax ``` show ha interfaces ``` ### Parameters None ### Output fields HA interface status values: - **Up**—All links of the same type are up. - **Off**—The interface is disabled in the configuration. - **Down**—The interface is configured, but is down. Either all links of the same type are down, or the primary node interface is not connected to the secondary node interface. ### Example The following example displays the status of the HA interfaces on node1 in a dual-interface configuration. ``` node1 # show ha interfaces  Interfaces default: up backup: up ``` ### User role Admin, Operator, or Monitor ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Central Management System**: Before Release 6.4.0. The output fields changed in Release 7.7.0.