--- title: "show health <service-category>" slug: "show-health-service-category" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:26Z published: 2026-08-04T17:22:26Z canonical: "docs.trellix.com/show-health-service-category" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show health <service-category> Displays details and recovery steps for appliance services in a particular category. Services can be in the healthy, disabled, critical, warning, or failed state. ### Syntax `show health <service-category> [critical | warning]` ### Parameters ``` service-category ``` The following service categories are supported: - Analysis - Cloud-Detection - DTI - Email-Processing - Metadata-Streaming - Network-Processing - System > [!NOTE] > Note > > Appliance service category names are case-sensitive. ### Example The following example displays details and recovery steps for DTI services that are in warning state only: ``` hostname # show health DTI warning Health Status: Last Updated at: : 2020-02-07T10:55:00    Service:        : FENET Cloud Services    Health Status:  : Warning    Details:        : One or more security content uploads have failed:  Failed to perform the security contents upload    Recovery Steps  : 1. Check the fenet server connection 2. Check the fenet server username and password using CLI 'show fenet dti configuration'                       3. Check proxy configuration using CLI 'show fenet'                       4. Check if firewall is blocking the outbound connections                       5. Call Trellix Customer Support if the failure persists ``` ### User role Admin or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Email Security — Server**: Release 9.0.0. The parameter `Email-Processing` was added in Release 9.1.0.