--- title: "show icap-service config" slug: "show-icap-service-config" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-icap-service-config" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show icap-service config Displays the status and configuration settings for the Internet Content Adaptation Protocol (ICAP) service. For details about how to integrate ICAP, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `show icap-service config` ### Parameters None ### Output fields The following table describes the output fields for the `show icap-service config` command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | ICAP enabled | ICAP service is disabled by default. Use the `icap-service enable` command to enable the service. | | Interface | Traffic sent over ICAP is received on the ether1 or ether2 management interface. | | Request Mod Enabled | Whether the request modification mode (REQMOD) is enabled or disabled. | | Response Mod Enabled | Whether the response modification mode (REQMOD) is enabled or disabled. | | TCP port | TCP port that is used for traffic sent over ICAP. By default, the ICAP server listens for traffic on port 1344. | | Secure port | TCP port that is used to establish a secure ICAP connection between the Network Security appliance and the ICAP client. By default, the secure ICAP connection is on port 11344. | | Secure Certificate | SSL certificate that is submitted by the ICAP server to connect to ICAP clients over secure ICAP connections. By default, the system-self-signed certificate is used to establish secure communication. | | Max Connection | Maximum number of simultaneous connections allowed on the Network Security appliance acting as an ICAP server. | ### Example The following example displays the status and configuration settings for the ICAP service. ``` hostname # show icap-service ICAP Configuration:  ICAP enabled             :  yes  Interface                :  ether2  Request Mod Enabled      :  yes  Response Mod Enabled     :  yes  TCP port                 :  1344  Secure port              :  11344  Secure Certificate       :  system-self-signed  Max Connection           :  25 ``` ### User role Admin, Operator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Network Security**: Release 8.3