--- title: "show ingress-egress stat" slug: "show-ingress-egress-stat-6" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:39Z published: 2026-11-19T12:27:39Z canonical: "docs.trellix.com/show-ingress-egress-stat-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ingress-egress stat This command applies to Virtual Security System instances. In other words, it applies only to the security appliances installed on hypervisors through the integration with IntelĀ® Security Controller. For Virtual Security System instances, the `show intfport` command is not available; you instead use `show ingress-egress stat` to view the number of inbound and outbound packets received, forwarded, and dropped by the Virtual Security System instance. It is also applicable to AWS environment and displays traffic statistics. This command has no parameters. **Syntax**: `show ingress-egress stat` **Sample Output**: `IntruDbg#> show ingress-egress stat` `Total Packets Received : 310004` `Total Packets Sent : 0` `Total Packets Dropped : 0` `Total Packets Received Byte : 61278498` `Total Packets Sent Byte : 0` `Total Rx IDS Packets : 310004` `Total Rx IPS Packets : 0` `Total Rx INBOUND Packets : 163204` `Total Rx OUTBOUND Packets : 146800` `Total Tx IPS Response Packets : 0` `Total Tx Jumbo skipped Packets : 0` `Total Rx Hello Packets : 70965` `Total Tx Hello Packets : 70965` `Total Tx EAGAIN error : 0` `Total Tx EMSGSIZE error : 0` `Total Tx send error : 0` `Total Rx alloc error : 0` `Total Rx EAGAIN/block error : 249575729961` `Total Rx refill : 310516` `Total Rx non-hello and zero length : 0` **Applicable to:** Virtual Security System instances and AWS Environment