--- title: "show ingress-egress stat" slug: "show-ingress-egress-stat" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:46Z published: 2026-10-05T15:40:46Z canonical: "docs.trellix.com/show-ingress-egress-stat" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ingress-egress stat This command applies to Virtual Security System instances. In other words, it applies only to the security appliances installed on hypervisors through the integration with IntelĀ® Security Controller. For Virtual Security System instances, the show intfport command is not available; you instead use show ingress-egress stat to view the number of inbound and outbound packets received, forwarded, and dropped by the Virtual Security System instance. It is also applicable to AWS environment and displays traffic statistics. This command has no parameters. **Syntax**: show ingress-egress stat **Sample Output**: IntruDbg#> show ingress-egress stat IPS INBOUND from NSP : 604574964 IPS INBOUND to NSP : 604577446 IPS INBOUND to NSP(loopback) : 0 IPS OUTBOUND from NSP : 608978156 IPS OUTBOUND to NSP : 608980063 IPS OUTBOUND to NSP(loopback) : 0 IDS INBOUND from NSP : 0 IDS INBOUND to NSP : 0 IDS INBOUND to NSP(loopback) : 0 IDS OUTBOUND from NSP : 0 IDS OUTBOUND to NSP : 0 IDS OUTBOUND to NSP(loopback) : 0 **Applicable to:** Virtual Security System instances and AWS Environment