--- title: "show interfaces ether2 {brief | configured}" slug: "show-interfaces-ether2-brief-configured" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-interfaces-ether2-brief-configured" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show interfaces ether2 {brief | configured} Displays the detailed running state of the ether2 interface. ### Syntax `show interfaces ether2 {brief | configured}` ### Parameters `<brief>` Displays the brief running state of the ether2 interface. `<configured>` Displays the configuration of the ether2 interface. ### Example The following example shows the detailed running state the ether2 interface: `hostname # show interfaces ether2` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis**: Before Release 6.4 - **Central Management System**: Before Release 6.4 - **Email Security — Server**: Before Release 6.4 - **File Protect**: Before Release 6.4 - **Network Security**: Before Release 6.4 - **Intelligent Virtual Execution - Server**: Before Release 6.4