--- title: "show intfport" slug: "show-intfport" updated: 2026-09-08T19:56:25Z published: 2026-09-08T19:56:25Z canonical: "docs.trellix.com/show-intfport" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show intfport Shows the status of the specified interface port or the management port of Trellix Intelligent Sandbox. ##### **Syntax**: **`show intfport <mgmt><1><2><3>`** Information displayed by the **`show intfport`** command includes: - Whether the port's administrative status is enabled or disabled. - The port's link status. - The speed of the port. - Whether the port is set to half or full duplex. - Total packets received. - Total packets sent. - Total CRC errors received. - Total other errors received. - Total CRC errors sent. - Total other errors sent. - IP address of the port. - MAC address of the port. - Whether the port is used to provide Internet access to analyzer VMs. - If configured to provide Internet access to analzyer VMs, then the corresponding gateway for this traffic. :