--- title: "show ip filter" slug: "show-ip-filter" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-ip-filter" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ip filter Displays the operative list of rules, regardless of where they came from. Rules that came from the user's configuration are numbered with sequence numbers matching the ones they have in the configuration. > [!NOTE] > Note > > You cannot operate directly on the unnumbered rules from the CLI. ### Syntax `show ip filter [all] [configured]` ### Parameters `[all]` Displays all IP filters. `[configured]` Displays the current set of rules in configuration. The rules should match the numbered rules listed by "show ip filter" (assuming IP filtering is enabled). ### Example The following example shows ip filter rules. ``` hostname (config) # show ip filter ``` ``` Packet filtering for IPv4: enabled ``` ``` Apply filters to bridges: no ``` ``` All active IPv4 filtering rules: ``` ``` Chain 'INPUT' #             Target     Proto     Source     Destination     Other              DROP       icmp      all        all             icmptimestamp-request              DROP       icmp      all        all             icmptimestamp-reply 1             ACCEPT     all       all        all             inb ether+              ACCEPT     all       all        all             inb lo              ACCEPT     all       all        all             inb tun0 Policy: DROP Chain 'OUTPUT' #             Target     Proto     Source     Destination     Other 1             ACCEPT     all       all        all             outb ether+              ACCEPT     all       all        all             outb lo              DROP       all       all        all             outb tun0 Policy: DROP Chain 'FORWARD' No rules. Policy: DROP ``` ### User role Admin ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security**: Release 7.5.0 - **Central Management System**: Release 7.5.0.