--- title: "show ip" slug: "show-ip" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-ip" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ip Displays all static and dynamic routes in the routing table, only the static routes, or only the active or static default gateway. ### Syntax `show ip {route [static] | default-gateway [static] | dhcp}` ### Parameters `route [static]` Displays all static and dynamic IP routes, or only static routes. `default-gateway [static]` Displays the active default gateway, or the manually-defined (static) default gateway. `dhcp` Displays DHCP-related configuration information. ### Example The following example shows all IP routes. ``` hostname # show ip route Destination      Mask           Gateway          Interface       Source default          0.0.0.0        172.16.1.1       ether1          static 172.16.0.0       255.240.0.0    0.0.0.0          ether1          interface         ``` ### Supported appliances This command was released as follows: - **Endpoint Security (HX)**: Release 2.5 - **Network Security**: Release 9.0