--- title: "show ipmi" slug: "show-ipmi" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-ipmi" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ipmi Displays the Intelligent Platform Management Interfaces (IPMI) configuration and its actual state. ### Syntax show ipmi ### Parameters None ### Example The following example displays the current IPMI configuration. ``` hostname (config) # show ipmi IPMI LAN Settings ---------------------------------------- Admin Shut Down         : yes Shut Down               : yes IP Address Source       : Static Address IP Address              : 0.0.0.0 Subnet Mask             : 0.0.0.0 Default Gateway IP      : 0.0.0.0 IPMI Firmware Installed ------------------------------- Firmware Version:         2.63 Device:                   1 IPMI Version:             2.0 IPMI Firmware Available For Update -------------------------------------------------------------------------- New Firmware Version:     2.67 New Firmware Filename:    FireEye_V267.bin Firmware Update Notice: IPMI firmware version 2.67 is strongly recommended with this release. It may be installed with the CLI command: ipmi firmware update latest Note: IPMI configuration and logs are reset to factory defaults on update.  See the release notes and user manual for more information. IPMI Firmware Availability Notice is enabled ``` ### User role Admin ### Command mode Config ### Supported appliances - Command introduced before Release 7.6.0.