--- title: "show ips interfaces" slug: "show-ips-interfaces" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-ips-interfaces" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ips interfaces Displays details about monitoring interfaces associated with IPS policies on an IPS-enabled Network Security appliance. The command output shows the names of monitoring interfaces on the appliance or the names of active IPS policies. For more information, see the Network Security IPS Feature Guide This command is not supported onthe SmartVision Edition appliances, which are Network Security appliances with SmartVision edition appliance licenses. The SmartVision Edition sensor is also called *Trellix Network Security, SmartVision Edition*. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated FireEye Central Management System appliance using the central management appliance proxying mechanism. ### Syntax `show ips interfaces` ### Parameters None ### Output fields The following table describes the output fields for the command. Fields are listed in the approximate order in which they appear in the output. | Field Name | Description | | --- | --- | | Interface | Identifier (A or B) of a monitoring interface that is associated with an IPS policy. | | Policy applied | Name of the IPS policy applied to the monitoring interface. | | Rule count | Number of IPS rules active on the monitoring interface. | ### Example ##### show ips interfaces ``` hostname # show ips interfaces Interface : A        Policy applied : Comprehensive        Rule count : 6882 Interface : B        Policy applied : myCustom1        Rule count : 1002 ``` ### User role Monitor, Analyst, Operator, or Admin ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Network Security**: Release 7.2.0