--- title: "show ips status" slug: "show-ips-status" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-ips-status" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ips status Displays the status of IPS global settings. This command is not supported on SmartVision Edition appliances, which are Network Security appliances with SmartVision Edition licenses. The SmartVision Edition sensor is also called *Trellix Network Security, SmartVision Edition*. This command displays the appliance-wide status of blocking by IPS rules, the status of the IPS policy manager daemon, and the status of the IPS license. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Trellix Central Management System appliance using the central management appliance proxying mechanism. ### Syntax `show ips status` ### Parameters None ### Output fields The following table describes the output fields for the command. Fields are listed in the approximate order in which they appear in the output. | Field name | Field description | | --- | --- | | IPS enabled | IPS is disabled by default. Use the `ips enable` command to activate IPS capabilities. For more information, see the Network Security IPS Feature Guide. | | IPS feature active | IPS is active when IPS is enabled. | | IPS feature licensed | The license is embedded in the CLI software. | | Auto‑update rules for an active policy | Status of the auto‑update rules feature for active IPS policies: - **enabled**—The feature is enabled. - **disabled**—The feature is disabled. This feature is enabled by default. For more information, see the Network Security IPS Feature Guide. | | IPS Global Blocking Status | | IPS blockmode | Status of the appliance-wide policy to allow, deny, or force blocking of traffic matched by IPS rules: - **enabled**—Only IPS rules with blocking action **block** can drop matched traffic. - **disabled**—All IPS rules act as monitoring-only rules. - **all**—All IPS rules act as blocking rules. IPS blockmode is enabled by default. For more information, see the Network Security IPS Feature Guide. | | IPS blockmode last modified | Date and time of the last update to the configuration of appliance-wide disabling or enabling of the blocking actions of all IP rules. | | IPS Configuration Status | | Fully applied to system | Status of the rules engine with respect to IPS rules specified by the active IPS policies: - **N/A (no active policies)**—No IPS policies are applied to monitoring interfaces. - **yes**—Loading of IPS rules to the rules engine is complete. - **no**—Loading of IPS rules to the rules engine is in progress. | | Config change ID of last change applied | (If the loading of IPS rules is still in progress) System identification number of the IPS configuration change being processed by the rules engine. | | Timestamp of last config change applied | (If the loading of IPS rules is still in progress) Date and time at which the last IPS policy was applied to monitoring interfaces | ### Examples ##### show ips status (No active IPS policies) ``` hostname # show ips status IPS enabled          : yes IPS feature active   : yes IPS feature licensed : yes Auto-update rules for an active policy : disabled IPS blockmode : disabled IPS blockmode last modified: 2018/10/20 20:59:14 IPS configuration status :        Fully applied to system : N/A (no active policies) ``` ##### show ips status (Loading of IPS rules into rules engine is complete) ``` hostname # show ips status IPS enabled          : yes IPS feature active   : yes IPS feature licensed : yes Auto-update rules for an active policy : disabled IPS blockmode : disabled IPS blockmode last modified: 2018/10/20 20:59:14 IPS configuration status :        Fully applied to system : yes ``` ##### show ips status (Loading of IPS rules into rules engine is in progress ``` hostname # show ips status IPS enabled          : yes IPS feature active   : yes IPS feature licensed : yes Auto-update rules for an active policy : disabled IPS blockmode : disabled IPS blockmode last modified: 2018/10/20 20:59:14 IPS configuration status :        Fully applied to system : no        Config change ID of last change applied : 3026        Timestamp of last config change applied : 2018/10/27 17:55:08 ``` ### User role Monitor, Analyst, Operator, or Admin ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Network Security**: Release 7.2.0. Support for IPS blockmode `all` was introduced in Release 7.5.0. Release 8.0.0. Updated command output to reflect IPS status changes.