--- title: "show ipv6 filter" slug: "show-ipv6-filter" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-ipv6-filter" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ipv6 filter Displays the operative list of rules for IPv6, regardless of where they came from. Rules that came from the user's configuration are numbered with sequence numbers matching the ones they have in the configuration. > [!NOTE] > Note > > You cannot operate directly on the unnumbered rules from the CLI. ### Syntax `show ipv6 filter [all] [configured]` ### Parameters `[all]` Displays all IP filters. `[configured]` Displays the current set of rules in configuration. The rules should match the numbered rules listed by "show ip filter" (assuming IP filtering is enabled). ### Example The following example shows ipv6 filter rules. ``` hostname (config) # show ipv6 filter ``` ``` Packet filtering for IPv6: enabled ``` ``` Apply filters to bridges: no ``` ``` All active IPv6 filtering rules: ``` ``` Chain 'INPUT' #        Target    Proto        Source        Destination    Other 1        ACCEPT    all          : : / 0       : : / 0        inb ether+         ACCEPT    all          : : / 0       : : / 0        inb lo         ACCEPT    all          : : / 0       : : / 0        inb tun0, state RELATED,ESTABLISHED         ACCEPT    tcp          : : / 0       : : / 0        inb tun0, dpt 22, state NEW         ACCEPT    tcp          : : / 0       : : / 0        inb tun0, dpt 443, state NEW         ACCEPT    udp          : : / 0       : : / 0        inb tun0, dpt 161         ACCEPT    icmpv6       : : / 0       : : / 0        inb tun0         DROP      all          : : / 0       : : / 0        inb tun0 Policy: DROP Chain 'OUTPUT' #        Target    Proto        Source        Destination    Other           1        ACCEPT    all          : : / 0       : : / 0        outb ether+         ACCEPT    all          : : / 0       : : / 0        outb lo         ACCEPT    all          : : / 0       : : / 0        outb tun0, state RELATED,ESTABLISHED         ACCEPT    tcp          : : / 0       : : / 0        outb tun0, dpt 443, state NEW         ACCEPT    udp          : : / 0       : : / 0        outb tun0, dpt 162         ACCEPT    icmpv6udp    : : / 0       : : / 0        outb tun0         DROP      all          : : / 0       : : / 0        outb tun0 Policy: DROP Chain 'FORWARD' No rules. Policy: DROP               ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security**: Release 7.5.0 - **Central Management System**: Release 7.5.0.