--- title: "show ipv6 route" slug: "show-ipv6-route" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-ipv6-route" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ipv6 route Displays all dynamic and static routes in the IPv6 routing table. ### Syntax `show ipv6 route` ### Parameters None ### Output fields The following table describes the output fields for the `show ipv6 route` command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | Gateway | IPv6 address of the default router or next-hop device. | | Interface | Name of the appliance interface. | | Source | Source that is assigned to the interface. | ### Example The following example shows all static and dynamic IPv6 routes. hostname > # `show ipv6 route` `Destination prefix` ``` Gateway                                        Interface                Source ------------------------------------------------------------------------------------ ::1/128::                                      lo                        local 2001:470:84a7:1720::/64::                      pether3 interface         2001:470:84a7:1720:225:90ff:fef3:2476/128::    lo                       local ``` ### User role Admin, Analyst, Operator, or Monitor ### Command mode Enable ### Supported appliances This command was released as follows: - **Email Security — Server**: Before Release 7.6 - **Network Security**: Before Release 7.6 - **Central Management System**: Before Release 7.6 - **File Protect**: Before Release 7.5 - **Malware Analysis**: Before Release 7.4 - **Endpoint Security (HX)**: Release 2.5