--- title: "show l7metadata-export config" slug: "show-l7metadata-export-config" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-l7metadata-export-config" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show l7metadata-export config Displays configuration settings between the Network Security appliance and the Splunk Enterprise server. > [!NOTE] > Note > > You cannot integrate a SmartVision Edition sensor with a Splunk Enterprise server. SmartVision Edition sensors do not support the Layer 7 Metadata Event Exporter feature. > > Splunk Enterprise integration is not supported on the NX x3xx appliances and the NX 10000 appliance. ### Syntax `show l7metadata-export config` ### Parameters None ### Output fields The following table describes the output fields for the `show l7metadata-export config` command. | Field | Description | | --- | --- | | Protocol | Whether the transport protocol used was UDP, TCP, or HTTPS. | | IP | The IPv4 address of the Splunk Enterprise server. | | Port | The port of the Network Security appliance used to initiate a connection with the Splunk Enterprise server. Valid values range from 1 to 65535. | | Authorization Header | The HTTPS event collector token generated on the Splunk Enterprise server. | ### Example The following example shows the configuration settings between the Network Security appliance and the Splunk Enterprise server: ``` hostname # show l7metadata-export config ``` ``` l7metadata-export configuration         Protocol:              HTTPS         IP:                    10.10.10.1         Port:                  8088         Authorization Header:  2f3f9f46-35b1-42b8-b769-f6f065cedfb6 ``` ### User role Admin or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Network Security**: Release 8.2