--- title: "show l7metadata-export health" slug: "show-l7metadata-export-health" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/show-l7metadata-export-health" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show l7metadata-export health Displays the following health states of the Layer 7 Metadata Event Exporter: - **Connected**—The Layer 7 Metadata Event Exporter is connected to the Splunk Enterprise server and is sending the network event logs. - **Not Connected**—The Layer 7 Metadata Event Exporter is not connected to the Splunk Enterprise server. - **Connected (Not Authenticated)**—The Layer 7 Metadata Event Exporter is connected to the Splunk Enterprise server, but authentication failed because of an invalid authorization token. - **Not Applicable For UDP Protocol**—If the Layer 7 Metadata Event Exporter is configured with the UDP transport protocol, you cannot view the health states. > [!NOTE] > Note > > You cannot integrate a SmartVision Edition sensor with a Splunk Enterprise server. SmartVision Edition sensors do not support the Layer 7 Metadata Event Exporter feature. > > Splunk integration is not supported on the NX x3xx appliances and the NX 10000 appliance. ### Syntax `show l7metadata-export health` ### Parameters None ### Example The following example shows that the L7 Exporter has been authenticated with Splunk Enterprise and is in the process of connecting: ``` hostname # show l7metadata-export health Connected ``` ### User role Admin or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Network Security**: Release 8.2