show layer2 forward

Prev Next

This command shows all the TCP, UDP ports, and the VLAN IDs that are enabled for layer 2 forwarding.

Syntax:

show layer2 forward <all|tcp|udp|vlan>

Parameter

Description

<all>

Shows all the port numbers(TCP,UDP) and VLAN IDs that are enabled for layer 2 forwarding

<tcp>

Shows all the TCP port numbers that are enabled for layer 2 forwarding

<udp>

Shows all the UDP port numbers that are enabled for layer 2 forwarding

<vlan>

Shows all the VLAN IDs that are enabled for layer 2 forwarding

Sample Output:

intruShell@john> show layer2 forward all

TCP ports: 50

UDP ports:

VLAN Ids:

All :

g0/1-g0/2 :

g3/1-g3/2 :

g3/3-g3/4 :

g3/5-g3/6 :

g3/7-g3/8 :

Example:

The sample output above shows the show layer2 forward command used for showing all the port numbers (TCP,UDP) and vlan IDs that are enabled for layer 2 forwarding.

Applicable to:

NS-series Sensors