--- title: "show layer2 mode" slug: "show-layer2-mode-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-layer2-mode-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show layer2 mode This command displays all the Layer 2 Passthru feature settings. These settings are configured in the Manager user interface; some of the settings are configured through the CLI. Layer 2 Passthru is configured within the Manager user interface. This command has no parameters. **Syntax:** `show layer2 mode` Information displayed by the show layer2 mode command includes the following: - Status of the Layer 2 Passthru feature (whether it is on or off) - The set duration - The set threshold - The number of occurrences that have occurred within the previous duration **Sample Output:** `intruShell@john> show layer2 mode` `Mode : on` `Duration : 10 minutes` `Threshold : 1` `Occurrences : 0` **Applicable to:** NS-series Sensors